Room Paint Designs

Large steam room paint protection LFA-S90 market sell well - Zhongshan University, room painting - automotive repair and maintenance industry
Beautiful car paint can not only play a role, but also to protect the body. Body paint, once damaged, it will take a series of highly specialized facilities and technology to repair, bathroom repair paint body painting process is an important feature. Market Reporter recently, found a large room ZD-S90 Paint be favorable to many consumers.

This personal copy, Zhongshan University ZD-S90 due by consumers, with its own qualities are inseparable, Zhongshan University housing body LFA-S90 for the assembled structure, both inside and outside the steel plate color produced by Baosteel, filled with 58mm thick glass wool insulation material, and filled in, making the entire wall, high strength, excellent performance of sealing, flame and strong, effective insulation. Housing surface in vitro anti-static, affixed to a transparent protective film, not easy to produce an electrostatic interaction. Aluminum frame around the design so that the appearance of the paint room elegant and sustainability.

At the same time, ZD-S90 of the control system PLC control, color widescreen LCD all operations, automatically displays a variety of conditions of employment, provide spraying, painting procedures. The main components used in all imports and domestic brands such as Siemens contactors, Japan, OMRON temperature controller with anti-pressure explosions and temperature alarm, anti-phase open, protection against abuse multiple performance than operating safely.

In comparison with other products, ZD-S90 is the biggest evidence of heat exchangers imported stainless steel high quality heat resistant by TIG, the three-cycles, the surface heat transfer, efficiency of heat exchange can reduce the heating time short, the device design Shiha pressure explosion-proof safety relief are safe and reliable to use.

Said personnel based on sales, in general, a paint room, good or bad should measure the following aspects:

1, the brightness. In general, the need to paint the room brightness 800-1000 If Leke, and the need to use around the light source D65, while the walls of the room should be dull white;

2, the air flow. Uniform from top to bottom of the painting of the flow of ambient air, the flow of 0,2-0.3 m / s;

3, the filtering effect. It depends on the type of paint from the roof of cotton, and general repairs are EU5 EU6 use two models, you can use the paint room when the lights in the room the sun in the upper part of the dust generally very low per square meter should be less than 5;

4, seal the walls. paint room must be sealed and the seams should not be painted in dust accumulation;

5, to ensure a positive pressure. painting room in the flow of air should be slightly higher than the wind to keep the painting room under positive pressure;

6, heating, sealing. Around the burner and the chimney must be sealed and can only occur after the burning of putty;

7, the heating rate. painting room of 20-60 the time is about 10-15min, should also be noted that some people do not paint a thermometer to measure ambient temperature in order to paint the room where the temperature of the metal body exercise.