Outside Paint

For those of you who read this article right now about how to choose the right paint finishes congratulations. You are a cut above the rest of the crowd who think shell color.

Before becoming a painter, I was about as naive as everyone else when it comes to glare levels. So I thought this article may be help you decide which paint finish or gloss level you want to use on different parts of your home. I hope this information will help give you fresh new ideas.

Flat Finish "for Great-limits if it is a true flat. Most apartments are not a true flat and cause streaking that is noticeable to the ceilings. Because of the washing capacity factor of some paints, paint Many manufactures add a little luster to the composition, do not give a true flat.

The old finish alkyd flat were durable, smooth and washable, but very alkyd or oil-based paint is almost a thing of the past because of governmental restrictions on VOC levels in paints.

You can buy regular paint the ceiling, which is a flat, true. I suggest that aid. The only exceptions are the kitchens and bathrooms. It is better to use something on the ceiling like an egg or washable mat.

Matt - this is ideal for bright walls. Some of the most recent lines of matte finishes are micro-technology ceramic beads in the paint giving the appearance of a true flat, but the smoothness and resistance to friction of a flat alkyd. Most of the cheaper lines of latex paint will leave marks if you break rubbing on them.

Matt is very architectural and research washable for fingerprints or smudges. I use it for bathroom walls and ceilings as well. In other rooms I use it only on the walls and ceilings using paint to dead flat on the ceiling.

Eggshell - This chandelier is widely used for walls, hallways, kitchens and bathrooms. Due to the high angular sheen you get a better surface washable latex over a formula. I used to use the shell before the recent arrival of ceramic Matt came.

Satin Finish - This chandelier is best used for trim, moldings, doors and windows. Many people make the mistake of using semi-gloss. Semi-gloss is too sticky research. The satin finish or gloss level is what I use for woodworking and trim either latex or oil based. This is standard in all upper class households.

Semi-Gloss - It has been used mainly in the old days of bathrooms, kitchens, hallways, trim and moldings. Porch floors, basements, etc. would be the only exception in modern times. All homes since I started painting in 1991, I used only semi-gloss a few times. It is so rare.

Gloss - The luster is common for front entrance doors. If you can imagine seeing a wide front door complete with all the white side windows set into the wood as you walk into a fancy house, you will see that some are done in bright white. And mostly it is an alkyd or oil based formula.

In my case, that's about to shine. I had to make doors in a house once using high gloss for a dentist. He wanted to be like white teeth I suppose!

That's all there is to do for other levels of gloss for exterior painting. To paint the outside I'll use a low gloss finish (which is like an eggshell) or a satin finish when it comes to siding, trim, doors, etc. I have just match the gloss level that was used before unless the customer wants something different.