Leaning Wall Mirror

I am in need of a large mirror surfaces for my dressing room. I found a mirror that I like, but it is a wall mirror to hang. I wonder if you can buy an easel or attachment screws on the back or place the mirror on the floor? I do not simply mirror the lean against the wall. (Safety Issue)

I think what you want to know is how to place based mirror on the ground without the danger that it may slip. Suggest you buy L-brackets to the hardware that you can hammer the angle you want the mirror to be. Screw the brackets to the sides of the base of the mirror and thread ground. The mirror will keep this corner without moving.

If you want an effective bridge so that you can change the angle, then you have several obstacles. You can put up posts on each side of the floor to ceiling mirror, then put a rod through the center of the mirror which passes through the holes in each pole. The rod is held in place with a half-round clip that screws into the mirror frame. Then you need a way to tighten the stem toward the poles with a button that screws onto the end of the dial. Not impossible, but you'll need to get advice on the hardware clamps, screws, etc. Good luck.

Not that many mirrors rack, but if you go to a furniture store for quality and claim the accessory catalogs that should be there will mirrrors easel better chance you will find in stores. Mirror catalogs often have a special section.

Some suites have their own room as a purchase option, but they are rarely in stock, because they are a hard-to-sell item. Pennsylvania House, now bankrupt, has had several good that you might find occasion or making furniture. .

If you can find a bridge that you can use. I do not think you can attach it to a dawn thing as an ordinary mirror dressing, but the bridge sounds like a good idea.

you could frame and attach to the wall by the frame or building a booth / stand for it. or check these
http://www.stacksandstacks.com/html/prod ...