Bespoke Mirrors

I just made some cupboards in the room and you want a mirror to adjust it. Is a sale glaziers cut to size, or if buying a second hand mirror and have it cut to size is the best / cheapest? Or is it B & Q do?

For a trunk of a car and go to your local Windows. Bears cut glass and mirrors quite cheap. So if something does go wrong, it does not cost loads u.

Glaziers will always cut mirrors to correct size.

http://www.bespokemirrors.com/

http://cgi.ebay.com/STUNNING-LARGE-THICK ...

It depends on where you live? go to a picture framing shop in their usual things like that. A New Mills near me.

inependent local glazier would be better.

For wardrobe, you may want tempered glass or safety film, they can bind to the back of the mirror - they can advise.

Cabinet height fulll mirror --- About 100 pounds

B & Q do you look white.

I would get a glass mirror and a glass cutter.

Put the mirror on a solid suface like a table ... (A few wet towels on the ground for broken glass).

Now, put a straight line on the glass, and punish with firm pressure. Run the glass cutter on the mirror .. (You can put oil on the first glass, to help cut glass, and avoiding fragments and splinters).

Now, run it on once or twice, with firm pressure. Then, the glass from which you "marked" on the edge of the table. Now, with a fast, hit the glass and it "should" snap clean.

If so, then get the sandpaper and go over the edge to sharpness "off.

If it does not work, then get vise grips wide (the type They bend metal with), and put it on the line and break down, and he should come clean.

Get a Dremel with a grinder to smooth sharp edges.

I wish you good luck ..

Jesse